SPINFIX MICRO_QR — pair, black matt finish

69.95

Small, stylish, elegant. The SPINFIX MICRO_QR wheel wall mount in black is a highlight in what ever room installed and will accentuate your wheel set.

In stock

SKU: 102 Category: Tags: , , ,

Description

The SPINFIX MICRO_QR cycling wheel bracket is suitable for all 5 mm QR hubs. The wheels are mounted to the MICRO_QR with a standard quick release skewer (DIN M5 with 0.8 mm thread pitch). For mounting a wheel, the skewer rod is first impaled through the spacer tube and then pouched through the hub. Now the skewer is screwed into the threaded bolt until the leaver is applying tension when clamped. Note that the spring on the lever sider of the skewer must stay next to the leaver cam.  The other spring and the nut can be stored on the threaded pin attached to the spacer tube. If no wheel is mounted the threaded pin can be used to screw in the spacing tube in to the main bolt.

Material
Aluminum, anodized and LASER engraved

Scope of delivery

  • 2 threaded bolts
  • 2 pressure plates
  • 2 spacer tubes
  • 2 wall plugs (not suitable for hollow walls)

Assembly

1. Drill a hole (Ø 10 mm) at the desired place. The wall has to have sufficient load-bearing capacities. The drilling has to be carried out with some caution. If the hole becomes to big the plug might not fasten.

2. Insert the wall plug and screw in the threaded bolt with the pressure plate attached. To achieve this a M5 screw or the quick release skewer with some lube applied to the thread can be used.

Wheel mounting

Ensure that the assembly awas carried out correctly. To mount a wheel, its skewer rod is first impaled through the spacer tube and then pouched through the hub. Now the skewer is screwed into the threaded bolt until the leaver is applying tension when clamped. The right tension is chosen analogous to mounting a wheel to a bike.

As stated before, it must be ensured that the QR skewer springs stay at the right place. One should be stored with the nut on the threaded pin on the spacer tube and the other should stay next to the leaver. It shall not be placed between the spacer tube and the hub.

Shipping and withdrawl

We are shipping with Deutsche Post and DHL. Shipping within the EU normally takes 3-4 business days.

You have the right to withdraw from the contract within 14 days without having to justify it.

All general Terms of Conditions of sale, including limitations of our liability, apply to all products and services sold.